How to track QR code scans

Updated November 3, 2026 · 5 min read

To count scans, the QR code has to be dynamic: it holds a short link, and the service behind that link records each visit before sending the person on. A static code can’t be tracked by anyone, because the phone reads the destination straight from the print.

Why only dynamic codes can be tracked

A static code is like an address written on an envelope: the phone reads it and goes straight there, so nothing in between ever sees the scan.

A dynamic QR code is like a forwarding address. Every scan passes through the short link first, and that brief stop is where the scan gets counted. It takes a fraction of a second and the person scanning doesn’t notice it.

If you already printed a static code and want numbers, the only option is to replace it with a dynamic one on your next print run.

What scan tracking shows

  • How many times the code was scanned, by day
  • How many different devices scanned it
  • The type of device and operating system, such as iPhone or Android
  • An approximate city, worked out from the internet connection

City is an estimate. On mobile data, a scan can show the city where the phone network connects to the internet, which may be a nearby larger city rather than the exact one.

What it can’t show

Scan tracking does not reveal who scanned. There is no name, phone number or email in a scan. Anyone who promises to tell you exactly which person scanned your poster is either asking people to fill in a form afterwards, or overstating what the data contains.

If you need to know who your customers are, ask for it openly on the page the code opens, for example with a sign-up form or a booking request.

Use one code per placement

The most useful thing tracking does is compare. Give each placement its own code: the shop window, the counter, the flyer, the packaging. Point them all at the same page if you like.

After a few weeks you will see which placement people actually scan, and you can spend your next print budget there. The QR code tracking page shows what the dashboard looks like.

Add UTM tags if you use Google Analytics

If your website uses Google Analytics, add UTM tags to the destination link, such as ?utm_source=qr&utm_campaign=window-poster. Scan counts tell you how many people scanned; your analytics then tells you what they did on your site afterwards.

With a dynamic code you can add or change the tags later without reprinting, because only the destination changes.

Try it now

Free, no account, no watermark.

See how scan tracking works

Questions

Can I see who scanned my QR code?

No. A scan does not include the person’s name, number or email. You can see how many scans there were, when, on what kind of device and roughly where. To learn who someone is, ask them on the page the code opens.

Can I track a static QR code?

No. A static code sends the phone straight to the destination, so nothing in between can count the scan. Use a dynamic code if you want scan numbers.

Why does the city in my scan report look wrong?

Location is estimated from the internet connection, not GPS. On mobile data it often shows the city where the phone network’s gateway is, which can be a nearby bigger city.

Does tracking slow the scan down?

Not noticeably. The short link records the scan and redirects in a fraction of a second.

Keep reading