What size should a printed QR code be?

Updated October 28, 2026 · 4 min read

Size a QR code to the distance people will scan it from. The working rule: the code should be at least one tenth as wide as the scanning distance, and never smaller than about 0.8 inch (2 cm).

The 10-to-1 rule

Divide the scanning distance by ten to get the minimum code width. Someone scanning from 3 feet (about 1 m) needs a code at least 3.6 inches (about 10 cm) wide. From 10 feet away, it needs to be about 12 inches (30 cm).

This is a starting point, not a law. Good light, high contrast and a short link let you go a little smaller. Poor light and a busy background mean you should go bigger.

Typical sizes by use

  • Business cards: 0.8 to 1 inch (2 to 2.5 cm)
  • Flyers, table tents and menus: 1.2 to 1.6 inches (3 to 4 cm)
  • Posters read from a few steps away: 4 to 8 inches (10 to 20 cm)
  • Window and wall signs read from across a room: 8 to 12 inches (20 to 30 cm) or more

What changes the size you need

More content means a denser pattern with smaller squares, which needs a bigger print to scan reliably. A long web address makes a busier code than a short one. Dynamic codes always store a short link, so their pattern stays simple however long the real destination is.

A logo adds no size requirement on its own, but keep it to about a fifth of the code width. Always leave the blank margin, about four squares wide, around the code.

Export at the right resolution

For print, download SVG: it is a vector file that stays sharp at any size. If your printer needs an image, use PNG at a pixel size at least as big as the printed size requires. Codes from the free generator download at up to 4096 pixels.

Then test it: print one copy at the final size and scan it from the real distance. If it hesitates, go bigger. More fixes are in why a QR code isn’t working.

Try it now

Free, no account, no watermark.

Make a print-ready QR code

Questions

What is the smallest a QR code can be?

About 0.8 inch (2 cm) wide for close-range uses like business cards, and only with a short link and strong contrast. Below that, many phones struggle.

How big should a QR code on a poster be?

Use the 10-to-1 rule: a poster read from 5 feet away needs a code about 6 inches wide. Make it bigger if people pass at a distance.

Does a logo make a QR code harder to scan?

Not if it is kept to about a fifth of the code width. QRCreator automatically adds extra error correction when you add a logo.

Keep reading